Pump Alternating Relay -Load Sharing Relay (35mm DIN)  PAC02/03泵交替运行(负载分配)继电器

Item No.: PAC02/03泵交替运行(负载分配)继电器
PAC02 / PAC03 Pump Alternating Relay are made to alternate 2 or 3 pumps in a multiple pump system. If required the second or third pump can be activated together with the first one. If more than one pump is  required to start at the same time. There is...
Description

PAC02 / PAC03 Pump Alternating Relay are made to alternate 2 or 3 pumps in a multiple pump system. If required the second or third pump can be activated together with the first one. If more than one pump is  required to start at the same time. There is a 10 second delay between each start to avoid a high inrush current.
PAC02 / PAC03 泵交替运行继电器是用于交替运行 2 或 3台泵的系统,使系统达到泵的寿命延长及同时老化的效果。继电器是根据每台泵的工作时间来确定投入及停止。当需要所有泵同时投入是,继电器提供10秒钟的启动间隔,避免同时启动带来的大电流。

                         
Pump Alternating Relay泵交替运行继电器 For 2 or 3 pumps
适用2台或3台泵
Supply 电源 85-265V AC, 24V DC ± 15%
Power Consumption 功耗 3.5VA
AC Supply Frequency交流电源频率 50 - 60Hz ± 10%
Reaction Time 反应时间 Closing input : <100ms/毫秒
Opening input: <100ms/毫秒
Minimum delay to activate the rescue pumps
最少启动备用泵间隔
10 sec/秒
First pump activated after Pump1 power up
上电后启动泵
Pump1
泵1
Output 输出 2NO or 3NO 2常开或3常开
Contact Rating 触点 220Vac 5A (cos ø =1)
Operation temperature 工作温度 -20 - +50C°
Humidity 湿度 <95%不结露
Weight 重量 <135g