La03 Liquid Level Relays are used for the monitoring of the discharge or charging level of conductive and non flammable liquids with a wide sensitivity range, for example, sewage water, chemicals, salt water. The sensitivity is adjustable (5~250kΩ) by a dial on the front of the relay. Discharge or charge monitoring is selected by the use of a dip switch.
LA03 液位控制继电器是具有灵敏度调节,用于导电非易燃液体的注入及排出的 控制(如:污水处理,化工,海水等) 。面板上的旋钮提供5-250kΩ的灵敏度调 整。用户可以通过改变DIP开关来选择注入或排除逻辑控制模式。Liquid Level Relays 液位控制继电器 | For discharge or charging control of conductive liquids 导电液体的注入及排出的控制 |
According Standard 根据标准 | EN61000-4-2/3/4/5 |
Supply 电源 | 85 - 265V AC/ 24V DC ±15% |
AC Aux. Frequency 交流电源频率 | 50/60Hz ±10% |
Sensor Output 传感器输出 | max 24V 0.2mA (最大) |
Sensor input 传感器输入 | Electrode电极 |
Adjustable sensitivity 调整灵敏度 | 5-250KΩ |
Immunity form micro power cuts 断电断开动作 | <1sec. |
Response time high level 高位响应时间 | <1sec. |
Response time low level 低位响应时间 | <1sec. |
Output 输出 | 1 C/O 继电器 |
Operation temperature 工作温度 | -20 - +50C° |
Humidity 湿度 | <95%不结露 |